Fraud Blocker
Your Best Cnc Lathe Supplier | You Can Trust the Chinese Machine Tool Factory | Your Best Machinery Equipment Manufacturers | You Can Trust the Life-Long Partners | You Can Get the Best Quality Machine Tools and the Most Affordable Price
GET AN INSTANT QUOTE

Top Automatic PLC control Circular Sawing Cutting Machine Manufacturers and Suppliers in China

HY-100NC Automatic PLC control Circular Sawing Cutting Machine

ANTISHICNC Automatic PLC Control Circular Sawing Cutting Machines are the ultimate solution for origin manufacturers, offering exactness, efficiency, and reliability. Designed to complement your workflow, they enable mechanized precision in every cut, from the first to the last.

Factory Sale HY-100NC Automatic PLC control Circular Sawing Cutting Machine

  • The gearbox body is integrally cast with premium-quality special materials for strength and impact resistance.

  • All bearings are of the highest precision and strength, imported, making the entire gearbox low in noise, stable in operation, and reliable in transmission performance.

  • The unique, specially optimized saw blade stabilization system greatly increases the rigidity of the clamping circular saw blade and more effectively reduces vibration and deflection of the

Technical Proposal for HY-100NC Automatic PLC control Circular Sawing Cutting Machine

Cutting capacity
Round bar ● mm 30-100
Square bar ■ mm 30~76
Round pipe ○ mm 30-100
Square pipe□ mm 30~76
Saw head spindle
Use TCT type Super hard circular saw blademm360 X 2.6T
Pin hole and aperture mm4xφ11 XPCD90X φ40
Spindle motorkw11(4P)
Spindle speedrpm20-120
Saw head feeding moethodAC servo motor+ball screw(Pivot type feeding)
Main clamping visesHydraulic, one set of vertical and horizontal clamping
Chips cleaning devicePassive wire brush/power wire brush(optional)
Gear backlash compensation deviceThrough shaft type magnetic powder brake
Workpiece feeding vise
Workpiece feeding drive methodAC servo motor+ball screw
Feeding vise clamping methodHydraulic, horizontal clamping
Workpiece front end removal length mm 10~99（This function could be closed）
Workpiece final remnant length mm 75+α（α is smaller than the setup cutting length)
Single feeding length rangemm10-680
Automatic workpiece feeding device
Allowable length to be loadedmm3000-6000
Feeding methodPre-queuing type|hydraulic lift
Hydraulic devices
Hydraulic motorkw2.25(4P)
Rated pressure of hydraulic system MPa 4.5～7
Hydraulic tank capacityL110
Cutting fluid cooling device
Cooling motorkw0.19(2P)
Machine size and weight
Weight(host machine+roller table)kg3900
Size(LXW)mm6500X2760

HY-100NC Automatic PLC control Circular Sawing Cutting Machine Structure Diagram

HY-100NC

HY-100NC Automatic PLC control Circular Sawing Cutting Machine Product Display Picture

Quality Assurance and After-Sales Service

  1. This machine is a high speed metal circular saw for general use. It is especially suitable for cutting various types of metal pipes and bars in high speed precisely.
  2. The major controlling parts, like the HMI (human-machine-interface), servo motors, inverter, PLC,  are using products from International famous brand – Mitsubishi.
  3. The cutting data and length of remnants are input in the HMI.
  4. Machine could cut work piece in maximum diameter of 75mm.
  5. Machine uses Mitsubishi AC servo motor together with high precision ball screw for workpiece feeding, featuring accurate feeding length. The single feeding stroke is 780mm. The operator could setup multiple feeding, so the cutting length is not limited.
  6. Cutting tool on this machine is TCT circular blade with outside diameter of 285mm and thickness 2.0mm.
  7. The main shaft speed could  be steplessly controlled to satisfy cutting different materials.
  8. Cutting method is rocker type, driven by servo motor. The cutting rate could be adjusted freely.
  9. The workpiece feeding system has slow positioning function.
  10. The clamping vises adopts three points universal clamping method, which is suitable for clamp workpiece in different shapes.
  11. For convenience of management, this machine has functions of out-of -stock shut off and automatic counter shut off.
  12. To prolong the service life of saw blade, machine has quasi-dry cooling device special for the saw blade.
  13. Machine has automatic lubricating device to lubricate the screw and guide ways at fixed times and quantity.
  14. Machine has manual operation and automatic operation modes.
  15. 15. The entire job circle, including workpiece feeding, clamping, cutting and out feeding, are automatically finished by the machine. The operator only need to load the workpiece to the roller table and collect the cut-off workpieces after cutting.

Assistant data:

1.The quantity of the saw blade should be subject the contract（standard is 1pc）.

2.For machine acceptance, the hydraulic oil, lubrication grease and other assistant materials are excluded.

3.The cable from the machine electric box to the power supply at the customer’s side should be offered by the user

4.The testing work-piece should be supplied by the user.

Warranty service:

One-year warranty.

The manufacturer guarantees to provide life-long paid maintenance services for the product.

High Speed Circular Sawing Machine HY-100NC: Precision Engineering and Efficiency

At high speed and under high accuracy, the Industrial Cutting High-Speed Circular Sawing Machine, HY-100NC, practically defines efficiency. For those who need accuracy with speed, this machine stresses in the details; combining science with the best technique so as to cut down on operations and cost made from the process. Whether working with heavy production season or the need for the consistent cutting of materials, the HY-100NC will always deliver relative clean-cut output.

995f9ce8 line4 1
enquiry now
More details
Featured Blog Topics

Insights, Tips & Trends

View All Blog
Scroll to Top
Get in touch with ANTISHICNC company
Contact Form 再用